Help with .bashrc

Onyx · 01-20-2004, 05:20 PM

Just switched to OS 10.3. In 10.2 I was able to use a .tcshrc file in my home directory to influence the terminal's behavior. In 10.3 it appears that the default terminal app has switched to bash. For some reason I am not able to get my terminal to respond/recognize the .bashrc file I created with pico. Is there something that I'm missing here? Did I forget to do something? Any help is appreciated.

-Onyx

saurya_s · 01-20-2004, 05:38 PM

Quote:


	Originally posted by Onyx Just switched to OS 10.3. In 10.2 I was able to use a .tcshrc file in my home directory to influence the terminal's behavior. In 10.3 it appears that the default terminal app has switched to bash. Is it really bash? type $SHELL and see. if it is bash, cheack for contents of /etc/profile I think it doesn't change the shell unless you do from Netinfo manager. SS For some reason I am not able to get my terminal to respond/recognize the .bashrc file I created with pico. Is there something that I'm missing here? Did I forget to do something? Any help is appreciated. -Onyx

cstuder · 01-20-2004, 05:53 PM

Stupid historical issue...

Create another file called .bash_profile in your home directory and enter the following code in it:

Code:

if [ -f ~/.bashrc ]; then . ~/.bashrc; fi

Bye,
christian

Onyx · 01-20-2004, 06:56 PM

That appeared to work -by entering the command into the .bash_profile.

Now another stupid question....

Based on reading other posts it looks like you enter aliases in bash just like in tcsh (e.g. alias xxx 'alias here'). Strangely aliases in my .bashrc file come with the error message:

-bash: alias: xxx: not found

What's that about!?!

Sorry for the newbie questions.. bash is sort of new to me.

Thanks for the help!

-Onyx

cstuder · 01-20-2004, 07:02 PM

Not stupid. The syntax changed and is now:

Code:

alias newcommand="old command line"

This and more information under

Code:

man bash

.

Bye,
christian

mschneider · 03-17-2004, 05:40 PM

christian,

seems to me that there is something different under 10.3

-> can't specifiy paths with umlauts

not sure if this is really new - didn't use the terminal often in the past few months

is there a way to specify paths/filenames containing umlauts?

strange: I can use umlauts on my dektop G5 - but not on the powerbook (both 10.3.3)

thank you very much!

markus

cstuder · 03-17-2004, 07:04 PM

Guten Abend... ;-)

Well, I have more troubles with umlauts now in Panther too, but never really bothered to do something about it.

I'm not sure whether it has something to do with the terminal-type specified in the preferences or another setting. So sorry, I can't help you there.

Bye,
christian

mschneider · 03-18-2004, 02:20 AM

well, glad that I'm not the only one

I believe that it depends on settings - but couldn't do anything to be able to set path by drag and drop again.

Changed the shell (csh, tcsh), terminal settings, but got just an error when did a 'cd blahblah' ('blahblah' by drag&drop; containing umlauts). Couldn't find a setting that shows umlauts (only esc-seq.) in the command line

the reason for this trying: Got a CD from a WinMachine with Filemaker files... they were all read-only (after copying to the HD!) - then I tried to 'chmod' all of them in one step

Finally, I copied the folder containing these files to the desktop and did this 'chmod'

Later on, I realized that there is a directory-name in my path that causes the problems (it's in the middle of the path)
After stepping through the path one-by-one, I could access the files - but not via drag&drop.

path to long?? But it cut some letters in the middle..

strange

thanks

markus

cstuder · 03-18-2004, 02:35 AM

Hey, maybe I can invite you over to www.osxserver.ch. It's a swiss forum and perhaps somebody there can help you.

Bye,
christian

01-20-2004, 05:20 PM	#1
Onyx Prospect Join Date: Nov 2002 Posts: 19	Help with .bashrc Just switched to OS 10.3. In 10.2 I was able to use a .tcshrc file in my home directory to influence the terminal's behavior. In 10.3 it appears that the default terminal app has switched to bash. For some reason I am not able to get my terminal to respond/recognize the .bashrc file I created with pico. Is there something that I'm missing here? Did I forget to do something? Any help is appreciated. -Onyx

01-20-2004, 05:53 PM	#3
cstuder Prospect Join Date: Jul 2003 Location: Switzerland Posts: 49	Stupid historical issue... Create another file called .bash_profile in your home directory and enter the following code in it: Code: if [ -f ~/.bashrc ]; then . ~/.bashrc; fi Bye, christian

01-20-2004, 06:56 PM	#4
Onyx Prospect Join Date: Nov 2002 Posts: 19	thanks! That appeared to work -by entering the command into the .bash_profile. Now another stupid question.... Based on reading other posts it looks like you enter aliases in bash just like in tcsh (e.g. alias xxx 'alias here'). Strangely aliases in my .bashrc file come with the error message: -bash: alias: xxx: not found What's that about!?! Sorry for the newbie questions.. bash is sort of new to me. Thanks for the help! -Onyx

01-20-2004, 07:02 PM	#5
cstuder Prospect Join Date: Jul 2003 Location: Switzerland Posts: 49	Not stupid. The syntax changed and is now: Code: alias newcommand="old command line" This and more information under Code: man bash . Bye, christian

03-17-2004, 05:40 PM	#6
mschneider Prospect Join Date: Jan 2002 Location: Solothurn, Switzerland Posts: 9	christian, seems to me that there is something different under 10.3 -> can't specifiy paths with umlauts not sure if this is really new - didn't use the terminal often in the past few months is there a way to specify paths/filenames containing umlauts? strange: I can use umlauts on my dektop G5 - but not on the powerbook (both 10.3.3) thank you very much! markus Last edited by mschneider; 03-17-2004 at 05:48 PM.

03-17-2004, 07:04 PM	#7
cstuder Prospect Join Date: Jul 2003 Location: Switzerland Posts: 49	Guten Abend... ;-) Well, I have more troubles with umlauts now in Panther too, but never really bothered to do something about it. I'm not sure whether it has something to do with the terminal-type specified in the preferences or another setting. So sorry, I can't help you there. Bye, christian

03-18-2004, 02:20 AM	#8
mschneider Prospect Join Date: Jan 2002 Location: Solothurn, Switzerland Posts: 9	path (umlauts) by drag&drop well, glad that I'm not the only one I believe that it depends on settings - but couldn't do anything to be able to set path by drag and drop again. Changed the shell (csh, tcsh), terminal settings, but got just an error when did a 'cd blahblah' ('blahblah' by drag&drop; containing umlauts). Couldn't find a setting that shows umlauts (only esc-seq.) in the command line the reason for this trying: Got a CD from a WinMachine with Filemaker files... they were all read-only (after copying to the HD!) - then I tried to 'chmod' all of them in one step Finally, I copied the folder containing these files to the desktop and did this 'chmod' Later on, I realized that there is a directory-name in my path that causes the problems (it's in the middle of the path) After stepping through the path one-by-one, I could access the files - but not via drag&drop. path to long?? But it cut some letters in the middle.. strange thanks markus

03-18-2004, 02:35 AM	#9
cstuder Prospect Join Date: Jul 2003 Location: Switzerland Posts: 49	Hey, maybe I can invite you over to www.osxserver.ch. It's a swiss forum and perhaps somebody there can help you. Bye, christian

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread: